Filter
Top Products
Getting Started
19
US
Preventing the TV from toppling over
As a protective measure, secure the TV. If you fail to do so, the TV may topple over resulting in serious
injury.
When installing the TV on a rack
1 Place the TV on the center of the rack.
2 Fit the support belt (supplied) to the TV, then firmly fasten with the screw for the support
belt (+PSW4 × 20 mm) (supplied) using a screw driver.
3 Fasten the support belt to the rack with the wood screw for the support belt (M3.8 × 20
mm) (supplied).
•Be careful not to pinch your fingers when setting up the TV and rack.
• Install the rack after allowing for a space of less than 25 cm (9 7/8 inches) from the wall. The wall will prevent the
TV from falling from the rack even if the TV leans backward towards the wall.
Notes
Screw for the support belt
(+PSW4 × 20 mm)
Wood screw for the support belt
(M3.8 × 20 mm)
Side view
Less than
25 cm
(9 7/8 inches)
continued