Sony 374 Stereo Amplifier User Manual


 
Features
TA-MR2ES
Distributed Audio Amplifier
General
Silver Finish Distributed Audio
Amplifier
35W x 2 (8 ohms 20Hz-20kHz,
THD 0.09%)
40W x 2 (4 ohms 20Hz-20kHz,
THD 0.09%)
Audio Signal Sensor Activation
19-inch Rack Mountable
IR Programming
12 Distinct IR Code Sets
IR Programming from Back Panel
Vol +/- and Mute On/Off (Toggle)
Inputs and Outputs
12V Trigger In x 1
12V Trigger Out With 1.5 sec
Delay x 1
IR Input Port with
Pass-Through x 1
IR Output Port x 1
©2005 Sony Electronics Inc.All rights reserved. Features and specifications are subject to change without notice.Sony is a trademark of Sony.All other trademarks are trademarks of their respective owners.
Sony Electr
onics Inc.
1 Sony Drive
Park Ridge, NJ 07656
F
or mor
e inf
ormation:
http://www.sony.com/dn
Specifications
General
Power Consumption:
100W
Power Requirements:
120V, 60Hz
Frequency Response:
5-100Khz,
+0.5/-2dB
Residual Noise:
<150_V
or less
Channel Separation:
60dB/45dB
Audio Input
Sensitivity: 150mV
Impedance:
50kilo Ohms
S/N: 94dB (A-weighted
filter, 150mV input level)
Audio Output
V
oltage:
Minim
um 2V
without clipped
Impedance: 1 kilo Ohms
S/N:
102dB (A-w
eighted
filter, 2V output)
Supplied
Accessories
Instruction Manual
AC Power Cord x 1
Rack Mount Ear x 2
Rack Mount Scr
ew x 8
Weights and
Measures
14 lbs. 5 oz (6.5 kg)
17” x 2 5/8” x 13 7/8”
(430 x 67 x 350 mm)
UPC Code
TBD