Filter
Top Products
CMT-BX30R.GB.3-293-639-11(1)
17
GB
Basic Operations
To remove the USB device
1
Select the USB function.
Press USB
.
2
Hold down
on the unit in stop
mode until “No Device“ appears.
3
Remove the USB device.
To erase audio les or folders from the
USB device
You can erase audio les or folders from
the USB device.
1
Connect a recordable USB device to
the (USB) port
.
2
Select the USB function.
Press USB
.
3
Press /
or +/
repeatedly to select the audio le or
folder you want to erase.
4
Press USB MENU
on the unit.
“Erase?” appears.
5
Press ENTER
.
“Track Erase?” or “Folder Erase?”
appears in the display.
To cancel the erase operation, press
.
6
Press ENTER
.
e selected audio le or folder is
erased.
Folder and le generation rules
When rst recording to an USB device,
a “MUSIC” folder is created directly
below the “ROOT.” Folders and les are
generated within this “MUSIC” folder
as follows according to the recording
method.
Synchro Recording
1)
Recording
source
Folder name File name
MP3 Same as the recording source
2)
CD-DA “CDDA001”
3)
“TRACK001”
4)
REC1 recording
Recording
source
Folder name File name
MP3
“REC1”
5)
Same as the
recording
source
2)
CD-DA “TRACK001”
4)
1)
In Program Play mode, the folder name is
“PGM_xxx,” and the le name depends on
the recording source (CD-DA disc or MP3
disc).
2)
Up to 32 characters of the name are assigned.
3)
Folder numbers are assigned serially
thereaer up to the maximum 999 (including
the “ROOT” and “MUSIC” folders).
4)
File numbers are assigned serially thereaer.
5)
A new le is recorded in the “REC1” folder
each time REC1 recording is performed.
Continued