Product Guide
4
SONOS PLAY:3 Back
Threaded mounting hole
1/4 inch (6.75mm) /
20-thread
The SONOS PLAY:3 has an integrated mounting hole on the back of the unit so it can be wall-
mounted if desired (mounting bracket not included.) See
"Wall Mounting the PLAY:3" on page 5
for more information.
Ethernet switch connector Use Category 5 Ethernet cable to connect to a router, computer, or additional network device
such as a network-attached storage (NAS) device.
LED indicators:
• Flashing Yellow (network activity)
• Green (link connection)
AC power (mains) input
(~100-240 V, 50-60 Hz)
Use the supplied power cord to connect to a power outlet.
Be sure to insert the power cord firmly into the back of the PLAY:3 until it is flush with the
back of the unit.