Filter
Top Products
3
SONANCE VISUAL PERFORMANCE
®
6” IN-CEILING
Painting The Grilles
Please refer to the accompanying
Painting Instructions
sheet for
painting instructions.
Speaker Adjustments
Pivoting Woofer and Tweeter
All Visual Performance Series 6” in-ceiling speakers have a
pivoting tweeter and all except the VP65RTL and VP65STL have a
pivoting woofer assembly. These pivoting drivers allow you to
direct sound towards or away from the listening area, depending
on how the speakers are being used:
• If you’re using the speakers in stereo or as the front left/center/
right speakers in a home theater, pivot the woofer and/or
tweeter directly towards the listening area. This will help the
sound from the speakers blend into a solid soundstage even if
the speakers are widely separated.
• If you’re using the speakers as surround channel speakers in a
home theater, you can create a more diffuse, spacious
surround effect by pivoting the woofer and/or tweeter towards
a wall or window, away from the listeners.
To Pivot the Tweeter:
Apply light pressure to the plastic ring around the outside edge
of the tweeter dome, as shown in
Figure 7
(left). Take care not to
touch or apply pressure to the tweeter dome itself.
To Pivot the Woofer:
Apply pressure on the outer edge of one of the tweeter support
brackets, as shown in
Figure 7,
(right). Do not touch or apply
pressure to the woofer cone.
Specifications
VP69R
Tweeter: 1" (25mm) Beryllium dome, Ferrofluid-
cooled, pivoting, in acoustic back chamber
Woofer: 6½" (165mm) Beryllium cone with a rubber
surround, pivoting
Frequency Response: 40Hz – 20kHz ±3dB
Impedance: 6 ohms nominal; 4 ohms minimum
Power Handling: 5 watts minimum; 150 watts maximum
Sensitivity: 90dB SPL (2.83V/1 meter)
Grille Material: Perforated Steel
Dimensions (Dia. x D): 9¾" x 4¾" (248mm x 121mm)
Cutout Dimensions (Dia): 8
5
/
32" (207mm)
Shipping Weight: 12 lbs (5.45kg) pair
VP67R
Tweeter: 1" (25mm) Aluminum dome, Ferrofluid-
cooled, pivoting, in acoustic back chamber
Woofer: 6½" (165mm) Coated carbon fiber cone with
a rubber surround, pivoting
Frequency Response: 43Hz – 20kHz ±3dB
Impedance: 6 ohms nominal; 4 ohms minimum
Power Handling: 5 watts minimum; 140 watts maximum
Sensitivity: 90dB SPL (2.83V/1 meter)
Grille Material: Perforated Steel
Dimensions (Dia. x D): 9¾" x 4¾" (248mm x 121mm)
Cutout Dimensions (Dia): 8
5
/
32" (207mm)
Shipping Weight: 11 lbs (5.0kg) pair
VP65R/VP65S/VP65RTL/VP65STL
Tweeter: 1" (25mm) Silk dome, Ferrofluid-cooled,
pivoting, in acoustic back chamber
Woofer: 6½" (165mm) Carbon fiber cone with a
rubber surround, pivoting (VP65R, VP65S)
Frequency Response: 44Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
Power Handling: 5 watts minimum; 130 watts maximum
Sensitivity: 90dB SPL (2.83V/1 meter)
Grille Material: Perforated Steel
Dimensions
VP65R (Dia. x D): 9¾" x 4¾"
(248mm x 121mm)
VP65S (H x W x D): 9¾" x 9¾” x 4
13
/16"
(248mm x 248mm x 122mm)
VP65RTL (Dia. x D): 9¾" x 3
1
/32"
(248mm x 77mm)
VP65STL (H x W x D): 9¾" x 9¾” x 3
1
/32"
(248mm x 248mm x 77mm)
Cutout Dimensions
VP65R, VP65RTL (Dia): 8
5
/32" (207mm)
VP65S/VP65STL (W x H): 8
5
/32" x 8
5
/32" (207mm x 207mm)
Shipping Weight: 10 lbs (4.5kg) pair
FIGURE 7:PIVOTING THE TWEETER (LEFT) AND WOOFER (RIGHT)