Sonance ST2416S Series Speaker User Manual


 
Performance Specifications:
Radiating Surface: 549 in
2
(3,540cm
2
) Planar Diaphragm
Driver System: 0.82 lb (0.37kg) Magnet with 1.02” (26mm)
voice coil
Frequency Response: 60Hz – 15kHz ±4dB
Power Rating: 40 Watts RMS as per EIA standard RS-426-A
Pressure Sensitivity: 89dB, 1W/1m
System Impedance: 8 ohms nominal, 5.5 ohms minimum
Transformer Primary Voltage: 70.7 Volts, 100 Volts and 8-ohm bypass
Transformer Primary Taps (70.7V): 0.5, 1, 2, 4, 8, 16 Watts
Transformer Primary Taps (100V): 1, 2, 4, 8, 16 Watts
Dimensions (H x W x D): 23¾” x 23¾” x 4
5
/
16
(603mm x 603mm x 110mm)
Product Weight: 7.0 lbs (3.2kg) each
Shipping Weight: 21.0 lbs (9.5kg) pair
212 Avenida Fabricante
San Clemente, CA 92672
(800) 592-4644 • (949) 492-5449
FAX: (949) 361-5151
www.soundadvance.com
Architects and Engineers
Specification:
The ST2416S SpeakerTile
®
shall be a one-way,
full-range device, producing frequencies from
60Hz to 15kHz in both horizontal and vertical
planes. The SpeakerTile shall have a sensitivity of
89dB (1W/1m), with a rated power of 40 watts
RMS according to EIA standard RS-426-A.
The total radiating surface area shall be 549 in
2
(3,540cm
2
). The high-frequency dispersion shall be
at least 140° to the upper frequency limit of the
device in question, in both horizontal and vertical
planes.
All SpeakerTile models shall have exterior dimen-
sions of 23¾” (603mm) in length, 23¾” (603mm)
in width, and 4
5
/
16
” (110mm) in total unit depth.
The complete unit shall weigh not more than 7.0
lbs (3.2kg) without its mounting accessories.
The loudspeaker shall be the Sound Advance
ST2416S or equivalent.
Polar Response:
ST2416S Series
24” x 24” Hemispherically-Radiating SpeakerTile
®
©2006 Sound Advance. All Rights Reserved.
Sound Advance, SpeakerTile and Planar Diaphragm Technology are trademarks or registered trademarks of Dana Innovations.
Specifications subject to change without notice. For the latest Sound Advance product information please go to
www.soundadvance.com
33-4539 11/06
-30
-60
60
30
0 Deg
-90
90
0dB –10db –20dB –30dB
500Hz
-30
-60
60
30
0 Deg
-90
90
0dB –10db –20dB –30dB
1kHz
-30
-60
60
30
0 Deg
-90
90
0dB –10db –20dB –30dB
2kHz
500Hz
1kHz
2kHz
-30
-60
60
30
0 Deg
-90
90
0dB –10db –20dB –30dB
4kHz
-30
-60
60
30
0 Deg
-90
90
0dB –10db –20dB –30dB
8kHz
-30
-60
60
30
0 Deg
-90
90
0dB –10db –20dB –30dB
16k Hz
4kHz
8kHz 16kHz
20Hz 50 100 200 500 1k 2k 5k 10k 20k
dBSPL
40
45
50
55
60
65
70
75
80
85
90
95
100
Warranty:
Sound Advance warrants the ST2416S to be free of any defect in materials
or workmanship for a period of 5 years from the date of purchase. During the
warranty period, Sound Advance will repair or replace (at its option) all such
defects without charge for parts or labor, if returned prepaid to the proper
Sound Advance service facility, together with the original sales receipt or other
proof of purchase. The unit will be returned prepaid.
On-Axis Frequency Response: