Filter
Top Products
3
INTRODUCTION
Thank you for purchasing Sonance Symphony
®
SSTR-series and SRS1 speakers. When properly installed
your new speakers will give you years of entertainment pleasure. This manual will teach you all about
your new speakers’ many innovative features and will show you how to get the very best
performance from them. Please read it thoroughly.
This manual covers the following speaker models: Symphony S623SST, Symphony S623SSTR; Symphony
S621SSTR and Symphony SRS1.
DESIGN AND FEATURES
• SST/SSTR models feature Single Stereo Technology
®
— reproducing left & right stereo channels from a single speaker — ideal for use
in areas where space is limited.
• SRS1 creates a diffuse, enveloping soundfield that is ideal for home theater surround channel use.
• Fully-pivoting woofers (S623
SSTR/S621SSTR/SRS1) direct the sound at listeners for clear sound even when speaker placement
options are limited.
• A 3-position tweeter adjustment switch lets you balance the speaker’s high-frequency energy to better compliment your room’s
setup and acoustics (S623
SSTR).
• The RotoLock
®
mounting system makes installation quick and easy.
• The detachable mounting flange expands installation options,allowing the speaker assembly to be easily mounted in custom cabinetry.
BOX CONTENTS
Your Sonance Symphony SST/SSTR/SRS1 speaker box should contain the following items:
SST/SSTR models: SRS1:
Figure 1: Sonance Symphony
®
SST-Series Speaker (left);
SSTR & SRS1-Series Speaker (right)
SONANCE SYMPHONY
®
SST, SSTR and SRS1
SAFETY WARNING:
These speakers have FastMount
®
tabs that prevent the speaker from falling out of the
mounting hole during the installation process.
The edges of the FastMount tabs are very sharp.
Use caution when handling the speaker.
See
Installation
(page 7) for complete information about the FastMount tabs.
(1) Symphony SST or SSTR speaker
(1) Paintable grille
(1) Plastic paint plug (installed on fronts of speakers)
(1) Mounting cutout template (in packaging)
(2) Symphony SRS1 speakers
(2) Paintable grilles
(2) Plastic paint plugs (installed on fronts of speakers)
(1) Mounting cutout template (in packaging)