Sonance Sonamp ASAP2 SAT Stereo Power Amplifier Stereo Amplifier User Manual


 
SERVICE
If you have any questions about the operation or installation
of your Sonamp
®
ASAP2,please call our Technical Assistance
Department on any business day at: (800)582-0772
or (949)492-7777 from 7 a.m.to 5 p.m.PST.
Should your product require repair or service, contact your
authorized Sonance retailer for help,or use the following procedure:
1.Prior to calling,note the product model number,serial number,
purchase date,and original retailer's name and address.
2. Contact our Technical Assistant Department at the number(s) above
and describe the problem. If required a Return Merchandise
Authorization (RMA) number will be issued. IMPORTANT: Do not
return the unit to Sonance without first obtaining an RMA
number or it will be returned to you.
3. If you are directed to return the unit to Sonance for repair,
pack the unit in its original shipping cartons (inner & outer).
Replacement packaging can be obtained from Sonance for a
small charge.
4. Contact United Parcel Service, Federal Express, or RPS to
arrange prepaid (not collect) shipping. Do not use the United
States Postal Service. IMPORTANT: Freight collect shipments
will be refused.
5.Write the Return Merchandise Authorization number on the
outside of the shipping carton.
6. For warranty work, please include a copy of the original bill
of sale inside the package.
Ship the packaged unit to:
Technical Assistance Department
Sonance
212 Avenida Fabricante
San Clemente,CA 92672-7531
WARRANTY COVERAGE (USA ONLY)
If,within five (5) years from the date shown on the bill of sale,the
unit fails due to a defect in workmanship or materials, Sonance
will, at its option and at no charge to the purchaser, repair or
replace the components of such unit which proves to be defective.
For this warranty to be effective,the bill of sale must show that
the unit was purchased from an authorized Sonance retailer.
This warranty shall apply exclusively to the original purchaser
and shall not apply to units purchased for industrial or
commercial use.
Furthermore, this warranty shall not apply if:
1.Damage to the unit was caused by accident,abuse or misuse.
2.The unit was modified,or repaired by unauthorized personnel.
3.The unit was not used as outlined in the operating instructions.
Exclusions and Limitations
The warranty set forth above is in lieu of all other warranties;
express or implied, of merchantability, fitness for a particular
purpose, or otherwise. The warranty is limited to Sonance
products registered herein and specifically excludes any
damage to any associated equipment,which may result for any
reason from use with this product.
Sonance shall, in no event, be liable to incidental or
consequential damages arising from any breach of this warranty
or otherwise. This warranty gives you specific legal rights, and
you may have other rights,which vary from state to state.
SPECIFICATIONS
Output Power,Stereo mode,RMS: 50 Watts per channel @ 8
65 Watts per channel @ 4
Total Harmonic Distortion: 0.2% 20Hz-20kHz @ 8
1.0% 20Hz-20kHz @ 4
B to A Delay: 3 seconds to 90 seconds (adjustable)
BTU/HR: 785
Protection Circuits: AC fuse,thermal,short circuit
Signal to Noise Ratio: -100dB below rated output (A-weighted)
Input Sensitivity: 300MV for 59W @ 8
Input Impedance: 47k ,Min.
Power Requirement: 120 VAC, 50/60 Hz
Power Consumption: 360 watts
Dimensions (WxHxD): 13 1/2" x 1 3/4" x 4 3/4" (343mm x 45mm x 121mm)
Specifications and features subject to change without notice.
6
SONANCE • 212 Avenida Fabricante • San Clemente, CA 92672-7531 Technical Support (800) 582-0772 ©2002 All rights reserved. Sonance is a registered trademark of Dana Innovations
www.sonance.com
33-2381 asap2 manual.qxd 4/29/02 1:13 PM Page 6
16-3/4" x 1-3/4" x 11-5/8" (425mm x 44mm x 295mm)