Filter
Top Products
3
IW-3 System Box Contents:
• (1) iPort In-Wall Docking System (with IR control and balanced audio capability)
• (1) iPort Balanced Audio Wallplate
• (1) 15V DC Regulated Power Supply
IW-4 System (#70004) Capabilities:
• All IW-3 capabilities PLUS:
• Allows extensive long-distance RS-232 control of iPod functions with 2-way communication (requires compatible
3rd-party controller).
IW-4 System Box Contents:
• (1) iPort In-Wall Docking System (with IR control, balanced audio and RS-232 capability)
• (1) iPort Balanced Audio Wallplate
• (1) RS-232 Cable (RJ-11-to-DB-9 connections)
• (1) 15V DC Regulated Power Supply
IW-5 System (#70005) Capabilities:
• All IW-4 capabilities PLUS:
• Delivers long-distance balanced video from iPod photo players
IW-5 System Box Contents:
• (1) iPort In-Wall Docking System (with IR control, balanced audio, balanced video and RS-232 capability)
• (1) iPort Balanced Video Wallplate
• (1) iPort Balanced Audio Wallplate
• (1) RS-232 Cable (RJ-11-to-DB-9 connections)
• (1) 15V DC Regulated Power Supply
iPod Models Supported
All iPort IW systems can be used with the following iPod models: iPod photo, iPod mini, 4th Generation iPod with Click Wheel,
3rd Generation iPod with touch wheel and buttons. See
Adjusting the iPort for Different iPod Models
, on page 10.
Selecting an Installation Location
The iPort is designed for installation and use in normal interior environments. When selecting an installation location for the
iPort, please consider the following:
• The iPort is not waterproof, nor is it water-resistant. Do not install the iPort outside or in a humid or wet environment.
• The iPort cutout is 4” (102mm) wide x 5
9
/16” (141mm) high. There also must be at least 3½” (89mm) depth within the wall
cavity for the iPort and its connections.
iPort ver. IW
Instruction Manual