Filter
Top Products
Specifications:
ASAP3D SE
Number of Channels: 2 (one stereo pair)
Output Power (Stereo): 25 watts RMS per channel, 0.25% THD, 20Hz – 20kHz, @ 8 ohms
50 watts RMS per channel, 0.25% THD, 1kHz, @ 4 ohms
Frequency Response: 20Hz – 20kHz +1dB/–3dB (w/20Hz high-pass filter)
Total Harmonic Distortion: 0.10% (1kHz, 8 ohms); 0.25% (1kHz, 4 ohms)
Signal to Noise Ratio: -94dB (w/22kHz filter, A-WTD); -88dB (with AC-sensing trigger)
Input Sensitivity: 0.9V for 25W RMS output
0.7V w/BBE ON (+3dB)
0.5V w/BBE ON (+6dB)
Input Impedance: 13k ohms
Maximum Source Input Voltage: 2.3VAC RMS
1.3VAC RMS w/BBE ON
Power Consumption: 200 Watts
Heat Output: 187 BTU/hr
AC Fuse: 120V Version: 2A (T2AL ~ 250V)
230V Version: 1.25A (T1.25AL ~250V)
Dimensions (W x H x D): 9½” x 1¾” x 12½” (241mm x 45mm x 318mm)
Rack Space Requirements: 1U (½-rack width)
Weight: 7.0 lbs (3.2kg)
©2008 Sonance. All rights reserved. Sonance, Sonamp and OptiLinQ are registered trademarks of Dana Innovations.
“BBE” and its designs are the registered trademarks of BBE Sound, Inc. ICEpower is a registered trademark of Bang & Olufsen ICEpower.
Due to continuous product improvement, all features and specifications are subject to change without notice.
For the latest Sonance product specification information visit our website:
www.sonance.com
212 Avenida Fabricante
San Clemente, CA 92672-7531 USA
(800) 582-7777 or (949) 492-7777
FAX: (949) 361-5151
Technical Support: (800) 582-0772
WWW.SONANCE.COM
01/08
Sonamp
®
Power Amplifiers
ASAP3D SE Stereo Power Amplifier