8
Setting the Dispersion Switch
The illustrations below show the recommended Dispersion Switch setting for most common
placement options for the AMC 800.
*Note: When the AMC 800 is used as a center channel speaker and is placed horizontally, the
dispersion switch may be set in either position.
INSTALLATION INSTRUCTIONS
IMPORTANT: This manual assumes that the installer possesses skill in the proper use of
hand and power tools, knowledge of local building and fire codes, and a familiarity
with the environment behind the wall or ceiling in which the speakers will be installed.
Optional preconstruction brackets are available for each model.
PAINTING THE SPEAKERS
If you intend to paint the speakers, it is best to do so before installation.
1) Remove the speaker grille.
2) Mask the baffle.
3) After painting, carefully remove the paint mask.
Note: Custom paint and grilles are available for an extra charge.
Horizontal Placement Vertical Placement