Filter
Top Products
Glentek Inc. 208 Standard Street, El Segundo, California 90245, U.S.A. (310) 322-3026 9
Sound Logic Breakout Board
The Sound Logic breakout board can be used with a Glentek motor and drive combination. The Sound
Logic board enables a customer to use their computer to send pulses to this board. This board then
sends these pulse and direction signals to the amplifier. The board connects directly to the parallel
printer port on a standard computer. In the future, the breakout board will be able to be controlled by
the standard USB port as well as the parallel printer port. The USB port will allow higher frequency
bandwidth pulse and direction signals to be ported out to the microstepping servo drives.
The board that was tested at Glentek is the Sound Logic PC-2-Route Rev. 1.9
For more information, please refer to Bob Campbell with Campbell Designs.
http://www.campbelldesigns.com/