Filter
Top Products
HT805 Series Owner’s Manual Page 8
1650 W. Jackson Ozark, MO 65721 (417) 883-4549Rev: 602
Input signal from dedicated subwoofer
output on receiver - processor
Output signal to optional 2
nd
subwoofer
Stereo line level signal from preamplifier
(preferabley a 2
nd
independent signal
from preamplifiers that have two outputs,
the 1
st
output would go directly to the
amplifier powering the satellites. A “Y”
cable at the preamplifer for each channel
can also be used to accomplish the same
purpose)
Output signal to amplifier powering the
satellites
Output signal to amplifier powering the
satellites
Switch set to FULL RANGE
Adjust level and phase
(crossover disabled)
Switch set to LOW PASS
Adjust crossover, level and
phase
Connection Diagram using a dedicated subwoofer output
Connection Diagram using a line level stereo output