Filter
Top Products
Starmate ST1 User Guide
11
• Snap the Clip Mount on to the back of the ST1
Receiver.
• Slide the ST1 Receiver with Clip Mount on to
the Suction Cup Mount so that the Clip Mount
is securely locked in place.
2. Plug the vehicle power adapter into the ST1
Receiver. Don’t plug the adapter into the
cigarette lighter until the installation is
completed.
Connecting to your Car Stereo
1. If your vehicle stereo has an AUX input, plug a
3.5mm audio cable into the Audio Out connector
on the ST1. Plug the audio cable’s white (L ch)
and red (R ch) connectors into your car stereo.
2. Alternatively, you can use the integrated FM
transmitter to connect your Sirius Starmate
Receiver. See the Menu Options section in this
manual for more information on configuring the FM
transmitter. Tune your vehicle’s radio to the
appropriate frequency to listen to the Receiver.