Sirius Satellite Radio SIR-KEN1 Satellite Radio User Manual


 
11
SIR-KEN1 Operation and Installation Guide
11
SIR-KEN1 Installation Guide
You must activate SIR-KEN1 before you
can start to receive the SIRIUS Satellite
Radio broadcast.
1. Make sure that the SIR-KEN1 is
properly connected and that its
antenna is oriented to receive the
SIRIUS satellite signal.
2. Turn on the Kenwood headunit.
3. Press and release the SRC/SOURCE
button on the head unit to select
SIRIUS as the source. (Each press of
the SRC/SOURCE button will change
to a different audio source.)
4. The display will read “UPDATING
CHANNELS” or “UPDATING” until the
SIRIUS channel update is completed.
This is where the latest channel line
up is updated on the SIR-KEN1
Receiver.
NOTE: Don’t push any buttons or
perform any operations until
updating has been completed.
Once updated and the SIRIUS
channels are received, the display
will change to “Call 1-888-539-SIRIUS
to Subscribe” and will place you in
SIRIUS Satellite Radio’s Preview
Channel (Channel 184). You should be
able to hear the Sirius Preview
channel’s Audio.
5. Enter the Kenwood head unit Menu
(See Kenwood owners manual for
details) and scroll to “ESN” to bring up
the SIRIUS ID (SID).
6. The unit will display “ESN
XXXXXXXXXXXX”. – Example “ESN
123456789123.” Write down the 12
digit SID in the location provided on
the next page for future reference.
(See Kenwood Owners Manual for
more information.)
7. Contact SIRIUS on the Internet:
https://activate.siriusradio.com
Follow the prompts to activate your
subscription.
You can also call SIRIUS toll-free at
1-888-539-SIRIUS (1-888-539-7474).
You will not be able to tune to any
other channels until you activate
your SIRIUS subscription. After your
Kenwood SIR-KEN1 is activated, the
display will read “SUBSCRIPTION
UPDATED” or “SUB UPDT”, “Press
any key to continue.”
Note: The SID can also be found on the
sticker that is on the bottom of the SIR-
KEN1 and on the packaging that the
unit was packed in.
Activating Your SIRIUS Subscription
Basic Operation
The SIR-KEN1 SIRIUS Satellite Radio
Tuner is compatible with any Kenwood
headunit that is “SIRIUS-Ready”.
Consult Kenwood or Sirius Customer
Support Departments for more
information about compatibility.
Please consult your Kenwood owner’s
manual for proper operation instructions
for using satellite radio products.