Sirius Satellite Radio SIR-CL3 Satellite Radio User Manual


 
12
SIR-CL3 Installation Guide
You must activate SIR-CL3 before you
can start to receive the SIRIUS
Satellite Radio broadcast.
1. Make sure that the SIR-CL3 is
properly connected and that its
antenna is oriented to receive the
SIRIUS satellite signal.
2. Turn on the Clarion headunit.
3. Press and release the SOURCE
button on the head unit to select
SIRIUS as the source. (Each press of
the SOURCE button will change to a
different audio source.)
4. The display will read “UPDATING” until
the SIR-CL3 channel update is
completed. This is where the latest
channel line up is updated on the
SIRIUS Receiver.
NOTE: Don’t push any buttons or
perform any operations until
updating has been completed.
Once updated and the SIRIUS
channels are received, the display
will change to “Call 1-888-539-SIRIUS
to Subscribe” and will place you in
SIRIUS Satellite Radio’s Preview
Channel (Channel 184). You Should
be able to hear the SIRIUS Preview
channel’s Audio.
5. Use the / buttons to select to
Channel “000” on the display to bring
up the SIRIUS ID (SID).
6. The unit will display “CH000”,
followed by “ESN
XXXXXXXXXXXX”. The SID will be
displayed in each of the Artist, Song
Title, and Composer Fields of the
Display – Example “ESN
123456789123.” Write down the 12
digit SID in the location provided on
the next page for future reference.
(See Clarion Owners Manual for more
information.)
7. Contact SIRIUS on the Internet:
https://activate.siriusradio.com
Follow the prompts to activate your
subscription.
You can also call SIRIUS toll-free at 1-
888-539-SIRIUS (1-888-539-7474).
You will not be able to tune to any
other channels until you activate your
SIRIUS subscription. After your
Clarion SIR-CL3 is activated, the
display will read “SUB UPDT”. Press
any key to continue.”
Note: The SID can also be found on the
sticker that is on the bottom of the SIR-
CL3 and on the packaging that the unit
was packed in.
Activating Your SIRIUS Subscription
Basic Operation
The SIR-CL3 SIRIUS Satellite Radio
Tuner is compatible with any Clarion
headunit that is “SIRIUS-Ready”.
Consult Clarion or SIRIUS Customer
Support Departments for more
information about compatibility.
Please consult your Clarion owner’s
manual for proper operation
instructions for using satellite radio
products.