Filter
Top Products
128-7129
8 of 10
7. Mounting the Antenna
The antenna should be placed on a relatively flat
surface whenever possible. To mount the antenna:
a. Plug the antenna into the ANT connector on the
back of the cradle.
b. Place the antenna at the preferred location
inside or outside the home.
g. If the antenna is mounted outside, route the
cable from the antenna position to the interior
of the home, working the cable through the
basement,under a window sill, etc.; make
adjustments and take up slack whenever
necessary.
h. Plug the antenna cable into the ANT connector
on the back of the Shuttle.
i. Plug the DC Adapter cable jack into the DC12V
receptacle on the back of the Shuttle.
j. Plug the adapter into a 110-volt wall receptacle.
k. You are now ready to enjoy Sirius programming
within your home.
4. Testing Antenna Signal Strength
When signal strength is weak, the possibility of
sound interruption is greater than degredation
of sound quality. To minimize signal
interruptions, it is wise to test antenna signal
strength.
Most Plug & Play systems and home units, such
as the Shuttle, have special antenna aiming
screens within their menu options. Refer to page
18 of the Plug and Play Shuttle Owner’s Manual
for Antenna Aiming instructions using the two,
10-segment horizontal bar graphs.
-8-