Simaudio W-6 Stereo Amplifier User Manual


 
MOON W-6 Mono Power Amplifier
Unpacking and Warning!
The MOON W-6 Mono power amplifier
is a large and heavy component that should be removed from
its box with care. We strongly advise that you seek another person to help lift the amplifier out of its
box, and place it in its final location.
The following accessories should be included inside the box with your amplifier:
AC power cable
4 Pointed screw-on tips (for the amplifier’s legs)
1 “dummy” RCA termination plug
This owner’s manual
Warranty card (USA and Canada only)
As soon as the amplifier is safely removed from its box and placed down, perform a thorough physical
inspection and report any physical damage to your dealer immediately. We suggest that you keep the
original packaging, and that it should be stored in a safe, dry place in case you’re required to transport
the amplifier. The customized packaging is specially designed to protect the amplifier from potential
damage that can arise when shipping such a product.
________________________________________________________________
WARNING!
To reduce the risk of fire or electric shock, do not expose this product to rain or
moisture. Do not attempt to “lift the ground” by removing the ground pin from
the AC cable. Make sure that your household electrical wiring supports proper
AC grounding techniques before plugging in this product. Keep the heat sinks
and top cover free of dust to allow for proper heat dissipation. Never expose
this product to extreme temperatures. Always connect the audio signal path
cables prior to connecting the AC mains.
CAUTION! No user-serviceable parts inside. Do not remove top cover, as severe electrical
shock may result.
IMPORTANT! Make sure that your local AC voltage complies with the unit’s label. Damage
caused by plugging thus amplifier into an AC receptacle of the wrong voltage will
not be covered by warranty.
____________________________________________________________________________________
Unpacking and Warning 5