Silvercrest KH 2278 CD Player User Manual


 

|
Operating Instructions
If the title designation under which a currently playing MP3-file was stored on the loaded CD (e.g.
song title and artist) is too long to be shown in its entirety on the display, then the title designa-
tion is continuously scrolled to the left during playback.
9.2.
Title selection
Titles in MP3 mode can be selected with the “SKIP/SEARCH 8” or “SKIP/SEARCH 7” button in a
similar manner as with audio CD playback.
To select a title first select in MP3 mode the file in which the desired title is located, and then
select the desired title.
1 Hold down the “Album/10+/ESP” button during playback or in STOP mode until the
number of the current file starts to flash on the LCD display.
2
Continue pressing the “SKIP/SEARCH8or “SKIP/SEARCH 7
button until the number and
designation of the desired file is indicated on the display.
3 Then press the “PLAY/PAUSE” button to playback the first title of the selected file.
4 Continue pressing the “SKIP/SEARCH 8or “SKIP/SEARCH 7” button until the number
and designation of the desired file is indicated on the display.
Track playback starts immediately without having to press the “PLAY/PAUSE” button.
If the title currently indicated on the display is the last title in the current file, then the MP3 player
will change over to the first title of the next file when if the “SKIP/SEARCH 8” button is depressed.
9.3.
Skip 10 tracks forward
Press the “10+/ESP/Album” button during playback or in PAUSE mode to skip ten tracks for-
ward within the music titles of a directory on the loaded MP3-CD.
9.4. Intro play function
The first 10 seconds of all tracks of the loaded CD are played one after the other in the Intro play
function.
Proceed in the following manner to switch on the Intro play function
1 If a CD is being played, then end playback by pressing the “STOP” button once.