Filter
Top Products
7
1/4"-20 x 1/2"
Machine Screw
4-Hole
Orientation
2-Hole Orientation
Figure 5
Back
Speaker
Self-Tapped Mounting
1. Locate the optimum location for the mounting
plate and use it as template to mark the drilling
locations. Do not drill or screw into the speaker
where you could possibly damage the internal
components.
2. Drill the pilot hole(s) using a 1/8" drill bit. The
holes(s) should not be drilled more than 1/2" depth,
see Figure 6 on the next page.