Filter
Top Products
high-eend signal
cable
- Twisted pair cable configuration, mylar foil shield and a
95% double braided shield
- Super shielded for an unsurpassed level of noise rejection
and a non-compromise high-end design
- Platinum-plated soldered screw connectors with sliced
collar for improved contact and reliable shockproof
connection
- Extreme flexibility allows for an easy installation
- Split ends with platinum-plated strain relief
splitter bridge
- Available in 2-channel and also a 4-channel
configuration for a total compact install
no noise
12V use
home use
multimedia
digital display
no noise
12V use
home use
multimedia
digital display
- 4 -
Signal
cables
To supply the amplifier with music, an RCA signal
cable is needed, running from the headunit to the
amplifier. This cable may never run next to the
power wire, or it will pick up to much
interference. So the signal cable has to be led
through the other side of the car, unless the
gutter overthere comprises already lots of noise
generating carspecific wiring, like alarm cables,
door locking cables, board computer cables
etcetera. In this case it is preferable to run the
RCA cable through the middle of the car . In
normal cars, a double shielded signal cable will do.
In noisy cars, which tend to pick up more
interference, a superior shielded cable is
recommended, like a twisted RCA cable, which
even offers more protection against
interferences.
signal cables
positive power cable
main fuse
grounding cable
remote wire
speaker wire
headunit
power wires
central grounding point
ASN
pprroodduucctt
oovveerrvviieeww
S101603 interconnect 2-channel 3ft 1m
S101604 interconnect 2-channel 12ft 3m50
S101605 interconnect 2-channel 16ft 5m
S101606 interconnect 4-channel 12ft 3m50
S101607 interconnect 4-channel 16ft 5m
S101601 Y-adapter 1 female to 2 male 1ft 30cm
S101602 Y-adapter 1 male to 2 female 1ft 30cm