Filter
Top Products
REPLACING THE EARPHONE NOZZLE
Replace the nozzle if it becomes damaged, or if wax buildup cannot be
removed using the wax removal loop.
Unscrew the retainer from the earphone base .
Remove the nozzle .
Slide the retainer over the new nozzle .
Place the nozzle on the earphone base with the ange aligned with the
groove in the base. Tighten the retainer .
Be careful when replacing the earphone nozzle. Parts are small and easily lost
if dropped.
1.
2.
3.
4.
FURNISHED ACCESSORIES
• Premium Carrying Case
• Fit Kit: contains soft foam, soft ex and triple ange sleeves
plus cleaning tool
• Stereo Adapter Plug - 1/4 in. (6.5mm) to 1/8 in. (3.5mm)
�
TECHNICAL SPECIFICATIONS
Transducer type Single balanced armature
Sensitivity (at 1kHz) 109 dB SPL/mW
Impedance (at 1kHz) 29 W
Output connector Gold-plated 3.5 mm (1/8-inch) stereo plug
Cable length GR -157 cm (62”)
W -157 cm (62”)
K -141 cm (56”)
Net weight 31 g (1.1 oz.)
Operational temperature -18° C to 57° C (0° F to 135° F)
Storage temperature -29° C to 74° C (-20° F to 165° F)
ACCESSORIES
For information about earphone accessories (listed below) and other Shure
products visit: www.shure.com
• Replacement Sleeves • Extension Cable
• Carrying Case • Push To Hear (PTH Module)
• Adapters • Volume Control
CERTIFICATION
Eligible to bear CE marking.
Conforms to European EMC Directive 89/336/EEC.
Meets applicable tests and performance criteria in European Standard
EN 55103 (1996) Parts 1 and 2, for residential (E1) and light industrial (E2)
environments.
MAINTENANCE
Careful maintenance ensures a tight seal between the sleeve and nozzle,
improving sound quality and product safety.
Keep the earphones and sleeves as clean and dry as possible.
To clean sleeves, remove them from earphones, gently rinse in
warm water and air dry. Foam sleeves require a longer drying
time. Inspect for damage and replace if necessary.
Ear sleeves must be completely dry before reusing.
Wipe the earphones and sleeves with mild antiseptic to avoid
infections. Do not use alcohol-based disinfectants.
Do not expose earphones to extreme temperatures.
Replace the sleeves if they do not t properly.
x
Do not attempt to modify this product. Doing so will void the
warranty and could result in personal injury and/or product failure.
CUSTOM EARPHONE SLEEVES
Those who use earphones regularly for extended periods of time often nd
custom-t molded sleeves offer the best comfort and sound isolation.
Ask a Hearing Health Care Professional about creating custom molded sleeves
for your earphones. For more information, contact:
Sensaphonics Hearing Conservation Toll Free: (877) 848-1714
660 N. Milwaukee Avenue In Chicago: (312) 432-1714
Chicago, IL 60622
e-mail: saveyourears@sensaphonics.com
www.sensaphonics.com