Shure PGA 48 Headphones User Manual


 
3
Specifications
Type
Dynamic (moving coil)
Frequency Response
70 to 15,000 Hz
Polar Pattern
Cardioid
Output Impedance
600 Ω
Sensitivity
at 1 kHz, open circuit voltage
-53.5 dBV/Pa¹ (2.10 mV)
Polarity
Positive pressure on diaphragm produces positive voltage on pin 2
with respect to pin 3
Weight
300 g (10.58 oz.)
Switch
On/Off Switch
Connector
Three-pin professional audio (XLR), male
Environmental Conditions
Operating Temperature
-20° to 165°F (-29° to 74°C)
Relative Humidity
0 to 95%
1 Pa=94 dB SPL
Optional Accessories and
Replacement Parts
Microphone Clip for SM58, SM57, SM87A,
Beta 87A, Beta 87C, PGA57, PGA58,
PGA48, PGA81 Microphone Clip for
SM58, SM57, SM87A, Beta 87A, Beta
87C, PGA57, PGA58, PGA48, PGA81
A25D
5/8" to 3/8" Thread Adapter 31A1856
7.6 m (25 ft.) Cable (XLR-XLR) C25J
25 foot (7.5m) Triple-Flex
®
Microphone
XLR Cable with chrome connectors
C25F
PGA48 Replacement Grille RPMP48G
60 cm (2 ft.)
Typical Frequency Response
1000 Hz
Typical Polar Pattern
Certifications
This product meets the Essential Requirements of all relevant
European directives and is eligible for CE marking.
The CE Declaration of Conformity can be obtained from:
www.shure.com/europe/compliance
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: 49-7262-92 49 0
Fax: 49-7262-92 49 11 4
Email: info@shure.de
166 mm (6.54 in.)
55.1 mm diameter
(2.17 in.)
Overall Dimensions