Filter
Top Products
1
AXS 1 UNIDIRECTIONAL DYNAMIC MICROPHONE
The AXS 1 is a multi–purpose dynamic microphone designed to per-
form in a variety of acoustically demanding environments. Its cardioid
pickup pattern helps control feedback, rejects unwanted sound, and
provides increased on-axis sensitivity. Its neodymium magnet pro-
vides a high output level and increased signal-to-noise rato.
A superior shock mount system, a dent-resistant steel mesh grille,
and a sturdy die-cast handle. A built-in pop filter protects against ex-
cessive breath noise.
SPECIFICATIONS
Type: Dynamic
Polar Pattern: Cardioid (unidirectional), symmetrical about axis
(Figure 1)
Frequency Response: 80 to 15,000 Hz (Figure 1)
Impedance (at 1 kHz): 260 Ω (actual)
Output Level (at 1 kHz): – 55.5 dBV/Pa ( 1.7 mV) open circuit
voltage*
*1 Pa = 94 dB SPL
Polarity: Positive pressure on diaphragm produces positive volt-
age on pin 2 relative to pin 3 of the microphone output connector
Operating Temperature Range: –7° to 49° C (20° to 120° F),t
at 0 to 95% relative humidity.
Switch: Built-in On/Off switch
Connector: 3-pin male XLR connector
Case: Die-cast zinc
Dimensions: 160 mm L x 56 mm W (6.3” x 2.2”)
Net Weight: 317.5g (11.2 oz)
FURNISHED ACCESSORIES
Break-Resistant Swivel Adapter A25D. . . . . . . . . . . . . . . . . . . . . . .
OPTIONAL ACCESSORIES
7.6 m (25 ft) Cable (XLR to XLR) C25J. . . . . . . . . . . . . . . . . . . . . . .