Filter
Top Products
Bracket (R)
Hexagonal bolt
with washer base
4
2
H
Attach bracket (L) and bracket (R) to each side of the unit,
using the hexagonal bolts with washer base (M5 x 8).
Mount the unit in place, using four self-tapping screws
(M5 x 12).
Use RTV (silicone sealer) on screw threads or around
the holes to prevent moisture intrusion.
It is necessary to change the spring attachment position.
1) Remove the lock screws on the side of the set using a
Phillips screwdriver.
2) Turn the spring attachment to the (V) mark side using a
screwdriver.
3) Replace the removed screws on the (V) mark side.
Determine the mounting location, and drill four mounting
holes.
3
5
INSTALLATION (2)
Procedure for Vertical Installation
Note
If the anti-vibration spring position has been changed and verified for vertical mounting (as shown on page 3), start with step 2.
1
Never mount the unit near the fuel tank.
Drill holes 4 mm in diameter.
Self-tapping screw
(M5 x 12)
Bracket (R)