Filter
Top Products
Operating the sleep timer
The sleep timer allows the
system to continue to operate
for a specified period of time
before automatically shutting
off.
To set the receiver to
automatically turn off after
the specified period of time.
Each time this button is pressed, the sleep time
changes as follows:
Each time this button is pressed, the
brightness of the fluorescent display changes
together as follows:
Adjusting the brightness of the
fluorescent display
OTHER FUNCTIONS
14
RECORDING
Start recording on the TAPE.
2
Recording with TAPE
Start play on the desired input.
3
Start recording on the VCR.
2
Recording with VCR
Start play on the desired input.
3
The audio signals from the desired input will
be recorded onto the VCR.
The volume, tone(bass, treble) and balance settings have no effect on the recording signals.
When you select tuner, CD or TV/AUX as a recording source, recording may be made on TAPE or VCR, or both
simultaneously.
In the display OFF mode, pressing any button
will restore the display ON mode.
While operating the sleep timer, “SLEEP” lights
up.
When the sleep time is selected, the fluorescent
display is dimly lit.
Select the desired input as a recording
source except for TAPE.
1
Select the desired input as a recording
source except for VCR.
1