Filter
Top Products
LISTENING TO RADIO BROADCASTS
Auto tuning
• Each time this button is pressed, the mode
changes as follows:
Tuning mode : "PRESET" turns off.
Preset mode : "PRESET" lights up.
15
1. Select the tuner and then the desired band.
2.
Select the tuning mode.
• Each time this button is pressed, the tuner is
automatically selected and the band is changed as
follows :
FM ST FM MONO AM
• When the FM stereo broadcast is tuned, the FM
mode changes as follows:
Stereo mode : "ST" lights up.
Mono mode : "ST" turns off.
• When FM stereo broadcasts are poor because of
weak broadcast signals, select the FM mono mode
("ST" turns off) to reduce the noise, then FM
broadcasts are reproduced in monaural sound.
• The tuner will now search until a station of sufficient
strength has been found. The display shows the
tuned frequency and "TUNED".
• If the station found is not the desired one, simply
repeat this operation.
• Weak stations are skipped during auto tuning.
3. Press the TUNING/PRESET UP ( or DOWN () button for more than 0.5 second.
RX-5502(A) 2007.5.17 9:15 AM 페이지 15