Sherwood RX-4109 Stereo Receiver User Manual


 
4
System Connections
• Do not plug the AC input cord into the wall AC outlet until all connections are completed.
• Be sure to connect the white RCA pin cords to the L (left) and the red RCA pin cords to the R (right) jacks when
making audio connections.
• Make connections firmly and correctly. If not, it can cause loss of sound, noise or damage to the receiver.
• If the electricity fails or the AC input cord is left unplugged for more than several days, the memorized contents
will be cleared. Should this happen, memorized them again.
• Change the position of the FM indoor anten-
na until you get the best reception of your
favorite FM stations.
• A 75Ω outdoor FM antenna may be used to
further improve the reception. Disconnect
the indoor antenna before replacing it with
the outdoor one.
• Place the AM loop antenna as far as possi-
ble from the receiver, TV set, speaker cords
and the AC input cord and set it to a direc-
tion for the best reception.
• If the reception is poor with the AM loop
antenna, an AM outdoor antenna can be
used in place of the AM loop antenna.
1
. CONNECTING ANTENNAs