Sharp XL-UH242 Home Theater System User Manual


 
03/12/17 XL-UH242 _2-10.fm
6
XL-UH242
General Information
Precautions
General
Please ensure that the equipment is positioned in a well-ventilated
area and ensure that there is at least 4" (10 cm) of free space
along the sides, top and back of the equipment.
Do not place anything on top of the unit.
Do not expose the unit to moisture, to temperatures higher than
140
˚
F (60
˚
C) or to extremely low temperatures.
If your system does not work properly, disconnect the AC power
cord from the AC outlet. Plug the AC power cord back in, and then
turn on your system.
This unit should only be used within the range of 41
˚
F - 95
˚
F
(5
˚
C - 35
˚
C).
Warning:
The voltage used must be the same as that specified on this unit. Us-
ing this product with a higher voltage other than that which is speci-
fied is dangerous and may result in a fire or other type of accident
causing damage. SHARP will not be held responsible for any dam-
age resulting from use of this unit with a voltage other than that which
is specified.
Volume control
The sound level at a given volume setting depends on speaker effi-
ciency, location and various other factors. It is advisable to avoid ex-
posure to high volume levels, which occurs while turning the unit on
with the volume control setting up high, or while continually listening
at high volumes.
Use the unit on a firm, level surface free from
vibration.
Keep the unit away from direct sunlight,
strong magnetic fields, excessive dust,
humidity and electronic/electrical equip-
ment (home computers, facsimiles, etc.)
which generate electrical noise.
In case of an electrical storm, unplug the
unit for safety.
4" (10 cm)4" (10 cm)
4" (10 cm)
4" (10 cm)
P
O
W
E
R
O
N
/
S
T
A
N
D
B
Y
C
D
T
U
N
E
R
(
B
A
N
D
)
O
P
E
N
/
C
L
O
S
E
V
I
D
E
O
/
A
U
X
U
S
B
Hold the AC power plug by the head when
removing it from the AC outlet, as pulling
the cord can damage internal wires.
Do not remove the outer cover, as this
may result in electric shock. Refer
internal service to your local SHARP
service facility.