Sharp XL-UH05H Stereo System User Manual


 
E-7
Listening to USB mass storage device/MP3 player
Note:
This USB mass storage device or MP3 player is not
compatible with MTP and AAC fi le systems.
To play back USB/MP3 player with folder
mode off
Press the USB button on the remote control or
FUNCTION button on main unit repeatedly to select
USB function. Connect the USB memory device that
has MP3/WMA format fi les on the unit. When the USB
memory is connected to the main unit, the device
information will be displayed.
Select desired fi le to be played back by pressing the
or button.
Press the (USB ) button. Playback will start.
File name, Title, Artist and Album name are
displayed if they are recorded in the USB memory
device.
Display content can be changed by pressing the
DISPLAY button.
Note:
To pause playback:
Press the
(USB ) button.
1
2
3
Press the USB button on the remote control or
FUNCTION button on main unit repeatedly to select
USB function. Connect the USB memory device that
has MP3/WMA format fi les on the unit. When the
USB memory is connected to the main unit, the track
information will be displayed.
Press the FOLDER button, then press FOLDER (
or ) button to select desired playback folder. To start
playback, go to step 4. To change the playback folder,
press the FOLDER ( or ) button to select another
folder.
Select desired fi le to be played back by pressing the
or button.
Press the (USB ) button. Playback will start.
File name, Title, Artist and Album name are
displayed if they are recorded in the USB memory
device.
Display content can be changed by pressing the
DISPLAY button.
1
2
3
4
To play back USB/MP3 player with folder
mode on
To remove USB memory device
Press the (USB ) button to stop playback.
Press the button again and wait until “OK” is
displayed.
Disconnect the USB memory device from the USB
terminal.
Notes:
Always remove the USB memory device after “OK”
appears on the display. Improper removal of the USB
memory device may cause irregularities to happen.
Should this happen, turn off the unit and then turn it
on again.
SHARP will not be held liable for the loss of data whilst
the USB memory device is connected to the audio
system.
This USB memory’s format supports FAT 16 or FAT
32.
SHARP cannot guarantee that all USB memory
devices will work on this audio system.
USB cable is not recommended for use in this audio
system to connect to USB memory device. Use of the
USB cable will affect the performance of this audio
system.
1
2
3
XL-UH1H_XL-UH05H_EN (A5).indd 7XL-UH1H_XL-UH05H_EN (A5).indd 7 6/9/2010 9:23:41 PM6/9/2010 9:23:41 PM