Filter
Top Products
11/7/8 10_XL-HF201PH_EN.fm
10
9
8
7
6
5
4
3
2
1
E-8
Listening to the iPod, iPhone or iPad
(continued)
Note:
Docking station is not recommended for iPad connection.
Adaptor for iPod and iPhone connection
Notes:
●
Please use the adaptor supplied with your iPod or iPhone unit.
●
You can use an audio cable to connect your iPod to the AUDIO
IN socket if:
1. your iPod adaptor does not fit into the iPod dock on the
main unit.
2. you have an iPod that does not have an iPod adaptor.
3. you have an iPod that does not have an iPod 30 pin
connector.
Caution:
Unplug all accessories from the iPod or iPhone before
inserting it into the dock.
Simply remove the iPod or iPhone from the docking station
or iPad connector from USB terminal. It is safe to do so
even during playback.
Notes:
● If the TV Out setting is already turned on at video menu,
the video is automatically displayed on the TV screen
when ENTER key is pressed.
● TV out display is not support through USB terminal.
(iPad)
● To return to watching video on iPod or iPhone screen,
press the MENU button to enter video menu. Then
press the DISPLAY (TV OUT) button for more than 2
seconds until “TV OUT OFF” appears.
● During iPod or iPhone video playback, pressing the
DISPLAY (TV OUT) button will not toggle video out
display between iPod and TV.
Caution:
● Unplug all accessories for the iPod or iPhone before
inserting it into the docking station.
● Stop button ( ) at main unit is invalid during iPod
function.
■ iPod and iPhone connection (Dock only)
Adaptor
No.
iPhone
Description
Capacity
12 iPhone 4GB & 8GB & 16GB
15 iPhone 3G 8GB & 16GB
15 iPhone 3GS 16GB & 32GB
19 iPhone 4 16GB & 32GB
■ To insert adaptor for iPod or iPhone
1
Open the docking station for iPod and iPhone by pulling
up.
2 Insert the adaptor for iPod or iPhone into unit and
connect your iPod or iPhone.
■ To remove adaptor for iPod or iPhone
Insert the tip of a screwdriver (“–” type,
small) into the adaptor hole as shown
and lift upward to remove.
iPhone
Dock connector
iPhone (bottom)
Dock for iPhone
Connector for iPhone
Adaptor for iPhone
■ iPod or iPhone playback
1
Press the ON/STAND-BY button to turn the power on.
2
Press the iPod or iPhone button on the remote control or
FUNCTION button repeatedly on the main unit to select iPod
function.
3
Insert iPod or iPhone unit into the dock of main unit. “DOCK
OK” will appear.
4
Press the / (iPod or iPhone / ) button to start
playback.
■ To disconnect iPod, iPhone or iPad
■ Watching videos on a TV connected to
iPod or iPhone
1
Press the DISPLAY (TV OUT) button for more than 2
seconds until “TV OUT ON” appear on display.
2 Press the ENTER button to start playback.
CD/USB
RDS