Filter
Top Products
E-9
Listening to USB mass storage
device/MP3 player
RRMCGA232AWSA
Note:
This product is not compatible with MTP and AAC fi le systems from USB mass
storage device or MP3 player.
Procedure to playback MP3/WMA disc
with folder mode on
To play back CD-R/RW.
1 Press the CD button, and load an MP3/WMA disc. Press the FOLDER
button and disc info will be displayed.
2 Press the PRESET ( or ) button to select desired playback folder.
(Folder mode on)
MP3 indicator
WMA indicator TOTAL indicator
Total number of folder Total number of fi les
FOLDER
indicator
FOLDER number First track number in the folder
3 Select desired fi le to be played back by pressing the or button.
4 Press the (CD/USB ) button. Playback will start and fi le name
will be displayed.
Title, Artist and Album name are displayed if they are recorded on
the disc.
In case of playback with the folder mode on, press the PRESET
( or ) button, and the folder can be selected even though it is in
playback/pause mode. It will continue playback/pause mode in the
1st track of the selected folder.
Display content can be changed by pressing the DISPLAY button.
Note:
If “Not Support” is displayed, it means “Copyright protected WMA fi le” or “Not
supported playback fi le” is selected.
File name display Folder display
Title display
Counter display
Album display Artist display
Programed play (MP3/WMA)
1 While in the stop mode, press the MEMORY button to enter the
programing save mode.
2 Press the PRESET ( or ) button on the remote control to select
the desired folder
Then press the or button on the remote control to select the
desired tracks.
3 Press the MEMORY button to save the track number.
4 Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be programed.
If you want to check the programed tracks, press the MEMORY button
repeatedly. If you make a mistake, the programed tracks can be cleared
by pressing the CLEAR button.
5 Press the (CD/USB ) button to start playback.
3 Press the MEMORY button to save the folder and track number.
4 Repeat steps 2 - 3 for other folder/tracks. Up to 32 tracks can be
programed.
5 Press the (CD/USB ) button to start playback.
To cancel the programed play mode:
During programed stop mode, press the
(CD/USB ) button. The display will
show “Memory Clear” and all the programed contents will be cleared
Adding tracks to the program:
If a program has been previously stored, the “MEM” indicator will be displayed.
Press the MEMORY button repeatedly to go to the last program memory. Then
follow steps 2 - 3 to add tracks. The new tracks will be stored after the last track
of the previous program.
Notes:
When a disc is ejected, the program is automatically canceled.
If you press the ON/STAND-BY button to enter the stand-by mode or
change the function from CD to another, the programed selections will
be cleared.
During the program operation, random play is not possible.
Listening to a CD or MP3/WMA disc
(continued)
XL-HF200P_USA_EN.indd 9XL-HF200P_USA_EN.indd 9 4/14/2011 5:05:36 PM4/14/2011 5:05:36 PM