Filter
Top Products
01/3/1 XL-3000W(A)1.fm
8
Preparation for Use
- System Connections -
„
Aerial connection
Notes:
z
Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better reception.
z
When static is still heard even after adjusting the position of the AM
loop aerial, try reversing the wire connections.
Installing the AM loop aerial:
External FM or AM aerial:
Use an external FM or AM aerial if you require better reception. Consult
your dealer.
Notes:
z
When an external FM aerial is used, disconnect the supplied FM
aerial wire from the FM 75 OHMS socket.
z
When using an external AM aerial, be sure to keep the wire of the
AM loop aerial connected.
„
Speaker connection
Connect the wire with the white line to the minus (-) terminal and the
black wire to the plus (+) terminal.
Caution:
z
Connect the speaker wires to the speakers first, then to the
unit.
z
Use speakers with an impedance of 6 ohms or more, as lower
impedance speakers can damage the unit.
z
Do not mistake the right and the left channels. The right speaker
is the one on the right side when you face the unit.
z
Do not let the bare speaker wires touch each other.
Supplied FM aerial:
Connect the FM aerial wire to the FM 75
OHMS socket and position the FM aerial
wire in the direction where the strongest
signal can be received.
Supplied AM loop aerial:
Connect the AM loop aerial wire to the AM
and GND terminals. Position the AM loop
aerial for optimum reception. Place the
AM loop aerial on a shelf, etc., or attach it
to a stand or a wall with screws (not sup-
plied).
< Assembling > < Attaching to the wall >
Wall Screws (not supplied)
External
FM aerial
External AM aerial
15 m (49 feet)
7.5 m (25 feet)
AM loop aerial
Earth rod
Incorrect Incorrect