Sharp CD-MPS66 Stereo System User Manual


 
14
CD-MPS66
CD-MPS600
Basic Operation
General control
! To turn the power on
Press the ON/STAND-BY button to turn the power on.
! Illumination light control
When the power is turned on, light illuminates around the display. To
turn on/off the light, hold down the CLEAR/DIMMER button on the
remote control for 2 seconds or more.
! Volume control
! Bass control (X-BASS)
! Equalizer
When the EQUALIZER (EQUALIZER MODE) button is pressed, the
current mode setting will be displayed. To change to a different
mode, press the EQUALIZER (EQUALIZER MODE) button repeat-
edly until the desired sound mode appears.
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode.
Main unit operation:
When the VOLUME control is turned
clockwise, the volume will increase.
When it is turned counterclockwise, the
volume will decrease.
Remote control operation:
Press the VOLUME (+ or -) button to in-
crease or decrease the volume.
When the power is first turned on, the unit
will enter the extra bass mode which em-
phasizes the bass frequencies, and "X-
BASS" will appear. To cancel the extra
bass mode, press the X-BASS/DEMO (X-
BASS) button.
During CD/TUNER/TAPE mode During GAME/VIDEO mode
30 MAXIMUM0
.....
Bass and treble are
emphasized.
Bass and treble are
slightly emphasized.
The sound is not
modified.
Treble is cut a little.
Treble is slightly
emphasized.
FLAT
ROCK
CLASSIC
POPS
VOCAL
JAZZ
Vocals(midrange
tones) are emphasized.
Bass and treble are
emphasized more.
Vocals and treble
are emphasized.
Bass is empha-
sized.
The sound is not
modified.
ACTION
SPORTS
RACING
Bass and treble
are emphasized.
Treble is cut a
little.
FLAT
ROCK
CLASSIC