Sharp CD-ES770 Stereo System User Manual


 
33
04/12/21 CD-ES770(U)3.fm
TINSEA095AWZZ
Advanced Features
CD-ES770
Cassette deck
Remote control
Tuner
If trouble occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such a problem occurs, do the following:
1 Set the unit to the stand-by mode and turn the power on again.
2 If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
Clearing all the memory (reset)
1 Press the ON/STAND-BY button to enter the power stand-by
mode.
2 While pressing down the button and the X-BASS/DEMO
button, press the PRESET button until "CLEAR AL"
appears.
Caution:
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD program.
Symptom Possible cause
Cannot record. Is the erase-prevention tab
removed?
Cannot record tracks with
proper sound quality.
Is it a normal tape? (You cannot
record on a metal or CrO tape.)
Cannot erase completely.
Sound skipping. Is there any slack?
Is the tape stretched?
Cannot hear treble. Are the capstans, pinch rollers,
or heads dirty?
Sound fluctuation.
Cannot remove the tape. If a power failure occurs during
playback, the heads remain
engaged with the tape. Do not
open the compartment with great
force.
Symptom Possible cause
The remote control does
not operate.
Is the AC power cord of the unit
plugged in?
Is the battery polarity correct?
Are the batteries dead?
Is the distance or angle
incorrect?
Does the remote control sensor
receive strong light?
Symptom Possible cause
The radio makes unusual
noises continuously.
Is the unit placed near the TV or
computer?
Is the FM antenna or AM loop
antenna placed properly? Move
the antenna away from the AC
power cord if it's located nearby.
9