Sharp CD-ES700 Stereo System User Manual


 
25
03/11/14 CD-ES700_77(U)3.fm
CD-ES700
TINSEA011AWZZ
CD-ES77
Tape Recording
! Recording from a CD (CDs)
You can record the desired CD using the DIRECT PLAY button.
To stop recording:
Press the button.
The CD and tape will stop.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button.
3 Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
4 Press the button.
Recording will be paused.
5 Press one of the 1 - 5 buttons to select the desired disc.
6 Within 5 seconds, press the DIRECT PLAY button to start
recording.
" Recording is started from the selected CD. When the play-
back of the last track is finished or the end of the tape is
reached, the CD and the cassette will stop automatically.
" CD playback will start approximately 7 seconds after the
tape starts.
7