Sharp MD-SR60E MiniDisc Player User Manual


 
15
Basic operation
Notes:
If power failure occurs whilst playing a disc using the AC
adaptor, disconnect it from the wall socket. Otherwise, play-
back may start automatically when electricity resumes.
If you connect the AC adaptor without installing the re-
chargeable battery, playback may start automatically. Be
sure to turn off the power.
Reduce the volume before starting to play. MiniDiscs,
compared to ordinary cassette tapes, have very little
noise. If the volume is adjusted according to your usual
expectations of noise, high volume may damage your
hearing.
The sound escaping from your headphones may annoy
people around you.
In particularly crowded places (such as on trains or
buses), reduce the volume.
14
1 Insert the headphones into the head-
phones remote control unit.
2 Plug the remote control into the socket
on the unit.
3 Insert a MiniDisc (page 8).
4 Press the
06 06
06 06
06 button.
Playback starts automatically with a playback only
MiniDisc or a MiniDisc which is protected against
accidental erasure (Auto-play function).
Volume control
Press the VOL+ button to increase the volume and
the VOL– button to decrease the volume.
To interrupt playback
Press the 06 button.
To resume playback, press the 06 button again.
To stop playback
Press the • /:OFF button.
If the unit is not operated for at least 2 minutes whilst
in the stop mode, the power will shut off automatically.
To turn off the power
Press the • /:OFF button whilst in the stop mode.
Playback : continued
Bass control
Each time the BASS button is pressed, the tone will
be switched as follows.
BASS1 Emphasised slightly
BASS2 Emphasised more
BASS3 Emphasised fully
BASS OFF Cancelled
Volume (0 - 30)
**03-BASIC OPERATION 02.07.2000, 10:03 AM15