Filter
Top Products
48
Working with the operating menu
By way of example of the “TUNE” menu, this section
describes how to use the operating menu.
After switching the transmitter on, the standard display is
shown on the display panel.
Getting into the operating menu
̈ Press the SET button to get from the standard display into
the operating menu. The last selected menu flashes on the
display.
Selecting a menu
̈ Press the ̆/̄ buttons to select a menu.
̈ Press the SET button to get into the setting mode of the
selected menu. The current setting that can be adjusted
flashes on the display.