Filter
Top Products
Putting the bodypack transmitter into operation
9
̈ Connect the 3.5 mm jack plug ƻ from the Sennheiser
microphone or line cable to the 3.5 mm jack socket
MIC/LINE ³.
̈ Lock the 3.5 mm jack plug by screwing down the
coupling ring Ƽ.
̈ Via the operating menu, adjust the sensitivity of the
microphone/line input (see page 20).
Attaching and positioning the microphones
ME 2
̈ Use the microphone clip ƽ to attach the microphone to
clothing (e.g. tie, lapel).
̈ Attach the ME 2 microphone as close as possible to the
sound source.
The ME 2 clip-on microphone has an omni-directional pick-
up pattern. It is therefore not necessary to position it
precisely.
ME 3
̈ Adjust the ME 3 headmic so that a comfortable and
secure fit is ensured.
The ME 3 headmic has a cardioid pick-up pattern.
̈ Position the microphone so that its sound inlet is
directed towards the sound source (e.g. mouth).
³
Ƽ
ƻ
ƽ