Filter
Top Products
SET 810 S 31
English
Using the induction neck loop
Put the EZT 1011 induction neck loop around your neck and insert its
plug into the socket at the top of the receiver. Set your hearing aid to
position "T".
Adjusting the volume
Adjust the receiver's volume with the operating
control. Make sure your hand doesn't cover the
operating control completely. This may prevent
interference-free reception.
If you are not using the receiver, pull the 3.5 mm
stereo jack plug out of the receiver's socket to
avoid discharging the battery. The receiver is
then turned off.
Set 810 S_088096_0106_Sp7.book Seite 31 Freitag, 9. Dezember 2005 11:37 11