Sennheiser RS 6 Headphones User Manual


 
19
WHAT TO DO IF ...
... the volume is up but you ̈ There is no audio signal available. Check the transmitter
cannot hear anything: connection. Is the volume at the headphone socket of your
hi-fi system or TV sufficient?
̈ Are you still within the transmitter’s range?
̈ Is the receiver on the same frequency as the transmitter?
... the sound is distorted: ̈ The headphone accuplug has gone flat, please
recharge it immediately.
... the sound is slightly noisy: ̈ You are about to leave the transmitter’s maximum range.
Soon transmission will be interrupted completely.
̈ The transmitter’s modulation level is too low. Increase
the volume on your hi-fi system (see also page 18).
... you can hear twittering and ̈ Two transmitters are interfering!
chirping, and the sound is “squeezed”: Choose a different transmission channel.
ACCESSORIES
The following items are available to complement your system:
BA 150 Rechargeable accuplug as a spare, for use when
the supplied accuplug is being recharged
L 150 Charger for recharging additional BA 150
accuplugs (recommended when more than two
headphone receivers are used with one
transmitter)
HDR 6 or HDR 6-9 Additional headphone receivers