Filter
Top Products
Putting the RS 165 into operation
16 | RS 165
Replacing and inserting the rechargeable batteries
1 Lightly twist the ear pads counterclockwise until you overcome a slight
resistance.
2 Lift the ear pads off the ear cups to
reveal the battery compartments.
3 Insert the rechargeable batteries into the co
mpartments. To replace the
batteries, pull the batteries out of the compartments and insert the
new ones. Be sure to observe correct polarity when inserting the bat-
teries. Please dispose old batteries as special waste or return them to
your specialist dealer.
4 Hook the ear pads onto the ear cups. As yo
u put back the ear pads,
observe the L (left) and R (right) markings on the
rear of the ear pads.
5 Twist the ear pads clockwise until you hear a click sound. Ensure that
they are loc
ked firmly onto the ear cups.
You can also power the headphones using standard batteries (AAA
size, 1.5 V). Note however, that standard batteries are not recharge-
able, and if you are using non-rechargeable batteries, you must not
place the headphones on the headphones holder.
1
2
3
4
5
NEW