Filter
Top Products
2
concrete walls, etc. as this can decrease the transmitter’s
range.
̈ Connect the transmitter‘s audio connection cable:
• either directly to the headphone socket or
• to the 1/4“ (6.3 mm) adapter and a corresponding
headphone socket.
̈ Set the volume for the headphone output of your audio
source to a medium level. If the headphone output volu-
me is set too low, the transmitter automatically switches
off.
Some TVs have a function that mutes the TV loud-
speakers when you connect a transmitter. If neces-
sary, change this setting via the operating menu of
your TV.
Connecting the transmitter to the mains
̈ Connect the mains unit to the socket at the rear of the
transmitter. Plug the mains unit into a wall socket. The
transmitter switches on and the ON/OFF LED lights up
green.
Preparing the headphones for use
2
Opening the battery compartments
̈ Turn the ear pads in the direction of the arrow until you
overcome a slight resistance and lift them off the ear
cups.
3
Inserting and replacing the rechargeable batteries
CAUTION
̈ Only use NiMH rechargeable batteries, never
use standard batteries!
̈ Insert the supplied rechargeable batteries. Secure the ear
pads to the ear cups.
̈ Charge the rechargeable batteries for at least 24 hours
prior to first time use. Subsequent charging time
d epends on the previous operating time and is up to
18 hours max.