Filter
Top Products
19
SPECIAL CONNECTIONS ON THE
RI 250-S AND RI 250-J RECEIVERS:
HEADPHONE CONNECTION ON THE RI 250-S / RI 250-J
The receiver features a headphone socket (3.5 mm Ø jack) for connecting a
Sennheiser headphone.
CONNECTING AN INDUCTION LOOP:
The receiver features the jack socket also for connecting an EZT 1011 in-
duction loop. The EZT 1011 inductively transmits the audio signal from the
receiver to your hearing aid.
NOTES
P When you connect the induction loop, the headphone systems at the RI
250-J are automatically switched off.
P Please first check whether your hearing aid is designed for use
with an induction loop.
P Alternatively, the EZI 120 induction coupler can be connected by
means of the KA-1K connection cable.
P Your Sennheiser dealer will be happy to provide you with infor-
mation on binaural solutions.