Filter
Top Products
13
Connecting a mobile telephone
(cable -BV-K / -BV-KP only)
The 2.5 mm 3-pole jack socket º allows you to connect
a mobile telephone. For this purpose, the NoiseGard™
active noise compensation must be switched on and the
microphone connector must be connected to the aircraft
radio/audio. A suitable adapter for your mobile telephone
with 2.5 mm jack socket is available from your Sennheiser
agent.
̈ Connect the audio cable to the 2.5 mm 3-pole jack
socket º on the operating control I and to the corre-
sponding jack socket on your mobile telephone.
You can adjust the volume of the mobile telephone via
the headset’s operating control. However, the functions
of the mobile telephone cannot be controlled via the
headset’s operating control.
̈ Operate your mobile telephone as usual and observe
the manufacturer’s instructions.
The latest information on cell phone compatibility is
available at www.sennheiser.com in the “Aviation Head-
sets” category.
Danger of accident due to reduced attention!
Making telephone calls or operating the
mobile telephone limits your attention and
may cause accidents.
During flight operation, do not use the
headset for telephone calls!
CAUTION!