Sennheiser HME 95 Headphones User Manual


 
7
̈
Connect the audio cable to the 2.5 mm jack socket (3-pin)
on the operating control and to the corresponding jack
socket on your mobile telephone (4-pin).
You can adjust the volume of the mobile telephone via
the headset’s operating control. However, the functions
of the mobile telephone cannot be controlled via the
headset’s operating control.
̈ Set the headset to mono mode (see “Switching between
mono and stereo mode” on page 8).
̈ Operate your mobile telephone as usual and observe the
manufacturers instructions.
Audio from the mobile telephone and from the intercom
are heard simultaneously through the headset.
Connecting an additional audio player
The 3.5 mm jack socket
allows you to connect and listen to an
additional audio player (e.g. MP3 player) through the headset.
DANGER! Danger of accident due to reduced
attention!
Listening to music or operating an audio
device limits your attention and may cause
accidents.
̈ During flight operation, do not use the
headset for listening to additional audio
sources!
Hearing damage due to high volumes!
This headset is capable of producing high
sound pressure levels. Higher volumes or
longer durations can damage your hearing!
̈ Set the volume to a medium level. Make
sure that you can hear critical sounds
such as warning alarms.