Filter
Top Products
7
Adjusting the volume directly on the audio system
̈ Connect the headset to the corresponding sockets of
your audio system. Adjust the volume directly on the
audio system.
Adjusting the microphone sensitivity
The microphone sensitivity has been factory pre-set to
300 mV/Pa.
̈ Remove the sticker as shown in the diagram.
̈ Change the microphone sensitivity by turning a
screwdriver in the direction of the arrow.
Hearing damage due to high volumes!
This headset is capable of producing high
sound pressure levels. Higher volumes or
longer durations can damage your hearing!
̈ Set the volume to a medium level. Make
sure that you can hear critical sounds such
as warning alarms.
CAUTION!
HME43-3_528263_1109_SP6_PRT.pdf 22HME43-3_528263_1109_SP6_PRT.pdf 22 11.11.2009 12:05:0511.11.2009 12:05:05