Filter
Top Products
30°
60°
90°
150°
120°
0°
10
20
30
40
50
dB
0
30°
60°
90°
120°
150°
180°
2 kHz
4 kHz
8 kHz
16 kHz
125 Hz
250 Hz
500 Hz
1 kHz
0
-5
+5
+10
+15
-10
-15
-20
-25
40 50 100 200 500 1K 2K 5K 10K
20K
20
+10
+5
+15
-15
0
-5
-10
Hz
50 100 200 500 1K 2K 5K 10K
20K
d
B
r
HMDC 26
Mikrophone polar diagram
high frequencieslow frequencies
ActivePassive
Microphone frequency response
Headphones frequency response
Farfield Nearfield
538364 03/10 Sennheiser and NoiseGard™ are registered trademarks of Sennheiser electronic GmbH & Co. KG. www.sennheiser.com
Headphone HMDC 26-600
Transducer principle
dynamic, closed
Ear coupling
supra-aural
Frequency response
20 – 18,000 Hz
Impedance
600 O mono / 1,200 O stereo
Sensitivity
108 dB SPL at 1 kHz, 1 mW
110 dB SPL at 1 kHz, 1 V
Maximal SPL
120 dB SPL at 1kHz
Active attenuation
18 dB (100 – 300 Hz)
Attenuation (active + passive)
15 – 30 dB
Distortion
< 0.5 % at 1 kHz
Contact pressure
approx. 3.6 N
Microphone
Type
BMD 424
Transducer principle
dynamic, hyper-cardioid characteristic
Frequency response
40 – 16,000 Hz
Freefield sensitivity, no load
0,4 mV / Pa at 1 kHz
Impedance
300 O
General data
Ambient temperature
Operation: -15 °C to +55 °C
Storage: -55 °C to +70 °C
Weight without cable
approx. 210 g
Power supply for NoiseGard™
(depending on type of cable)
2 x 1.5 V AA alkaline battery (IEC LR 6) or
2 x 1.2 V AA rechargeable battery (IEC LR 6) operating time with batteries approx. 60 h
Packaging
Individual package dimensions
194 mm x 84 mm x 249 mm
Master carton dimensions
512 mm x 252 mm x 382 mm
Units per master carton
12
Languages
German, English, French, Italian, Spanish, Dutch, Russian
Technical Data
Product versions
Model Item no. Description Cable, length 2 m
HME 26-100 (4)
504203 100 O per system, condenser
microphone cardioid
–
HME 26-600 (4)
504204 600 O per system, condenser
microphone cardioid
–
HME 26-100
502454 100 O per system, condenser
microphone omni-directional
–
HME 26-100-7
502455 100 O per system, condenser
microphone omni-directional
steel wire
cable with
open ends
HME 26-600
502467 600 O per system, condenser
microphone omni-directional
–
HME 26-600-7
502468 600 O per system, condenser
microphone omni-directional
steel wire
cable with
open ends
HME 26-600 S
502469 600 O, one side, condenser
microphone omni-directional
–
Model Item no. Description Cable, length 2 m
HMD 26-100
502451 100 O per system,
dynamic microphone cardioid
–
HMD 26-100-7
502452 100 O per system,
dynamic microphone cardioid
steel wire cable
with open ends
HMD 26-600
502463 600 O per system,
dynamic microphone cardioid
–
HMD 26-600-7
502464 600 O per system,
dynamic microphone cardioid
steel wire cable
with open ends
HMD 26-600 S
502465 600 O, one side,
dynamic microphone cardioid
–
HMD
26-600-X3K1
502466 600 O per system,
dynamic microphone cardioid
steel wire cable
with XLR-3
connector and
6.3 mm jack plug
HMDC 26-600
502453 NoiseGard™, 600 O per system,
dynamic microphone cardioid
–