Filter
Top Products
10
Care and maintenance
Cleaning the headset
Use a soft, slightly damp cloth to clean the headset from
time to time. If the headset is very dirty, use a cloth
dampened with mild, soapy water. Do not use any
solvents or cleansing agents.
Replacing the earpads
For reasons of hygiene, the earpads should be replaced
from time to time. Grasp the edge of the earpad and pull
sharply. Attach the new earpad to the earcup by pressing
firmly around the earpad until you hear all 12 latches lock
into place. Repeat for the other earcup.
Danger of short-circuit due to the ingress of
water!
Water entering the housing of the headset
can cause a short-circuit and damage the
electronics.
CAUTION!
Book_523984_1208_SP7.book Seite 10 Montag, 5. Januar 2009 10:09 10