Filter
Top Products
ቢ
ባ
16
Setting up the transmitter
Place the transmitter near your television set or hi-fi system.
Putting the transmitter into operation
Ǡ Use the supplied cable to connect socket ቢ on the TI 150 / TI 300
transmitter with the headphone socket on your television set or hi-fi
system.
NOTE
If your television set does not have a headphone socket, the sound signal can also
be taken from the SCART socket (video recorder socket). Please order the
suitable Sennheiser adaptor (Cat. no. 47874) from your Sennheiser dealer.
Only for the TI 150 mono transmitter: For television sets without any
suitable headphone sockets, the sound can also be taken directly from
the loudspeaker by using the Sennheiser MKE 100 TV microphone
(Cat. no. 03354). Connection to socket ቢ. (This is supplied instead of
the headphone socket cable in the UK version).
Ǡ Connect the supplied plug-in mains unit to socket ባ on the TI 150 / TI 300
transmitter, then plug the mains unit into the mains.